Electrolux ERFG2393AS Complete Owners Guide - Page 16

Water Supply Connection

Page 16 highlights

16 WATER SUPPLY CONNECTION WARNING To avoid electric shock, which can cause death or severe personal injury, disconnect the unit from electrical power source before connecting a water supply line to the appliance. CAUTION To Avoid Property Damage: • We recommend using Copper or Stainless Steel braided tubing for the water supply line. We do not recommend using water supply tubing made of ¼ in. plastic. Plastic tubing greatly increases the potential for water leaks, and the manufacturer will not be responsible for any damage if you use plastic tubing for the supply line. • Do Not install water supply tubing in areas where temperatures fall below freezing. • Chemicals from a malfunctioning water softener can damage the ice maker. If your home has a water softening system, ensure you maintain the softener and it is and working properly. IMPORTANT Ensure your water supply line connections comply with all local plumbing codes. Before Installing the Water Supply Line, You Will Need: • Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver • Access to a household cold water line with water pressure between 30 and 100 psi. • A water supply line made of ¼ in. (6.4 mm) OD, copper or stainless steel tubing. To determine the length of tubing needed, measure the distance from the water inlet valve at the back of the refrigerator to your cold water pipe. Then add approximately 6 ft. (1.8 m), so you can move the refrigerator out for cleaning. • A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve. • Do not reuse compression fittings or use thread seal tape. • A compression nut and ferrule (sleeve) for connecting a copper water supply line to the ice maker inlet valve.  NOTE Check with your local building authority for recommendations on water lines and associated materials prior to installing your new refrigerator. Depending on your local/ state building codes, we recommend, for homes with existing valves, Smart Choice® water line kit 5305513409 with a 6 ft. (1.8 meters) Stainless Steel Water Line, and for homes without an existing valve, Smart Choice® water line kit 5305510264 with a 20 ft. (6 meters) Copper Water Line with self-tapping saddle valve. Please refer to Electrolux.com for more information.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

16
WATER SUPPLY CONNECTION
Before Installing the Water Supply Line, You
Will Need:
Basic Tools: adjustable wrench, flat-blade
screwdriver, and Phillips
TM
screwdriver
Access to a household cold water line
with water pressure between 30 and
100 psi.
A water supply line made of
¼
in.
(6.4 mm) OD, copper or stainless steel
tubing. To determine the length of
tubing needed, measure the distance
from the water inlet valve at the back
of the refrigerator to your cold water
pipe. Then add approximately 6 ft.
(1.8 m), so you can move the refrigerator
out for cleaning.
A shutoff valve to connect the water
supply line to your household water
system. DO NOT use a self-piercing
type shutoff valve.
Do not reuse compression fittings or use
thread seal tape.
A compression nut and ferrule (sleeve)
for connecting a copper water supply
line to the ice maker inlet valve.
WARNING
To avoid electric shock, which can
cause death or severe personal injury,
disconnect the unit from electrical power
source before connecting a water supply
line to the appliance.
CAUTION
To Avoid Property Damage:
• We recommend using Copper or
Stainless Steel braided tubing for
the water supply line. We
do not
recommend
using water supply tubing
made of
¼
in. plastic. Plastic tubing
greatly increases the potential for water
leaks, and the manufacturer will not be
responsible for any damage if you use
plastic tubing for the supply line.
• Do Not
install water supply tubing
in areas where temperatures fall
below freezing.
• Chemicals from a malfunctioning water
softener can damage the ice maker.
If your home has a water softening
system, ensure you maintain the
softener and it is and working properly.
IMPORTANT
Ensure your water supply line connections
comply with all local plumbing codes.
NOTE
Check with your local building authority
for recommendations on water lines and
associated materials prior to installing your
new refrigerator. Depending on your local/
state building codes, we recommend, for
homes with existing valves,
Smart Choice
®
water line kit 5305513409 with a 6 ft. (1.8
meters) Stainless Steel Water Line, and for
homes without an existing valve,
Smart
Choice
®
water line kit 5305510264 with
a 20 ft. (6 meters) Copper Water Line
with self-tapping saddle valve. Please refer
to Electrolux.com for more information.