Electrolux ERFG2393AS Complete Owners Guide - Page 8
Door opening, Cabinet Leveling & Refrigerator, Door Alignment if necessary
![]() |
View all Electrolux ERFG2393AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
8 INSTALLATION NOTE If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider. Door opening Door Door You should position your refrigerator to allow easy access to a counter when removing food. For best use of refrigerator drawers and freezer baskets, position the refrigerator where both can be fully opened. Cabinet Leveling & Refrigerator Door Alignment (if necessary) Guidelines for final positioning of refrigerator: NOTE • Rest all 4 corners of the cabinet firmly on the floor. • Slightly elevate the front to ensure doors close and seal properly. • Align and level the doors with each other. You can meet most of these conditions by raising or lowering the adjustable anti-tip legs. To level the cabinet using the anti-tip legs: 1. Slightly open freezer drawer to reveal anti-tip legs at bottom of cabinet. 2. Lower anti-tip legs until they are both touching the floor. Use a pair of pliers to adjust. The product is shipped with doors adjusted to the lowest position on the hinges. To make final door height adjustments: 1. Open the freezer drawer to access the hinges for the fresh food doors. 2. Insert 6 mm Allen wrench into the shaft of the lower hinge (included with unit). To lower door: turn adjustment screw counterclockwise if looking at the door from below. To raise door: turn adjustment screw clockwise as shown below. To raise unit: turn leg clockwise if looking from the top. To lower unit: turn leg counterclockwise if looking from the top. 3. Ensure both doors are bind-free with their seals touching the cabinet on all 4 sides and the cabinet is stable.
![](/manual_guide/products/electrolux-erfg2393as-complete-owners-guide-a3048fe/8.png)