Electrolux ERFG2393AS Complete Owners Guide - Page 23
Storage Features
View all Electrolux ERFG2393AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
23 STORAGE FEATURES Shelves Repositioning the Air Seal CAUTION To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change. Allow the glass shelves to stabilize to room temperature before cleaning. Do not wash in the dishwasher. You can easily adjust shelf positions in the refrigerator compartments to suit your needs. The shelves have mounting brackets that attach to slotted supports at the rear of each compartment. To change the shelf position: 1. Remove all food from the shelf. 2. Lift the front edge up and pull the shelf out. For glass shelves: 1. Remove the air seal by pushing the seal straight back. 2. Position the air seal toward the outside edge of the shelf to avoid the air tower when the shelf is pushed back into place. 3. Install the seal by sliding the open channel end of the seal onto back edge of shelf until the seal sits snug on the back of the shelf and the flap sits at about a 10° angle from the shelf surface. IMPORTANT Note the air seal located at the rear of the shelf. Shelves located on the left side should have the air seal mounted on the far left side. Shelves located on the right side should have the air seal mounted on the far right side. This is to ensure there is no interference with the large air tower on the back wall of the cabinet. This also applies to the crisper shelves. 3. Replace by inserting the mounting bracket hooks into the desired support slots. 4. Lower the shelf and lock it into position. To adjust the slide-under shelf: Push the front half shelf backward toward the rear of the cabinet until the rear half shelf drops down, and then gently continue pushing the front half shelf back and under the rear half shelf. Slide-Under Shelf