Electrolux ERFG2393AS Complete Owners Guide - Page 21

21 AUTOMATIC WATER DISPENSER Your refrigerator is equipped with an internal water dispenser mounted inside the cabinet, on the left hand fresh food door. Using the dispenser after installation 1. Before dispensing, please ensure you enable Water Dispenser on the display (LEDs above the button are lit). 2. Begin filling the system by pressing and holding a drinking glass against the water dispenser paddle. Water dispenser ON Water dispenser OFF 1. Your appliance will arrive with the water dispenser already activated and ready to use. To disable the water dispenser press and hold Water Dispenser for 3 seconds. You have disabled water dispensing when the LEDs above Water Dispenser are not lit. 2. Place a cup against the paddle, and press to dispense water to use the dispenser. CAUTION Hold the door with one hand while dispensing water to keep the door from moving and possibly dispensing water on the floor. 3. Keep the glass in this position until water comes out of the dispenser. It may take about 1½ minutes. 4. Continue dispensing water for about 4 minutes to flush the system and plumbing connections of any impurities (stop to empty the glass as necessary). Priming the water supply system CAUTION For the proper dispenser operation, use water supply pressure between 30 psi and 100 psi. Excessive pressure may cause the system to malfunction. Before dispensing water for the first time, be sure to prime the water supply system. If you do not flush the system, the first glasses of water may be discolored or have an odd flavor.  NOTE If you prefer to keep the internal water dispenser disabled, use the appliance control display to disable it. The LEDs will not illuminate above WATER DISPENSER.