Electrolux ERFG2393AS Complete Owners Guide - Page 19
Controls And Settings
![]() |
View all Electrolux ERFG2393AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
19 CONTROLS AND SETTINGS Internal Water Dispenser Appliance Control Display 1 2 3 4 5 6 7 1 Change Select the Freezer or Refrigerator icon to Temperature change the temperature. Press +/- buttons to set the temperature Freezer -6˚F/-21˚C to control range: 6˚F/-15˚C Refrigerator 34˚F/1˚C to control range: 44˚F/7˚C 2 CLEAR ALERTS Resets any active alarms illuminated on the appliance control display (DOOR OPEN, HIGH TEMP, POWER OUTAGE). 3 Freeze Boost Prior to grocery shopping, activate Freeze Boost so newly purchased food designated for the freezer will be preserved as quickly as possible. Freeze Boost will remain active for up to 24 hours before automatically deactivating or manually exiting by pressing Freeze Boost to turn the function off. This will reset the freezer to the previous temperature setting. 4 F/C Touch to toggle the display from Fahrenheit to Celsius. 5 WATER DISPENSER Press and hold for 3 seconds to turn off and on. When the water dispenser is turned on the LEDs above WATER DISPENSER will illuminate. 6 Default Settings Press and hold for 3 seconds to reset to factory settings. 7 Water Filter Press and hold for 3 seconds to reset status after you replace the filter. The status shown at right of button will reset to GOOD. 8 Air Filters Press and hold for 3 seconds to reset status after you replace the filter. The status shown at right of button will reset to GOOD. 8 NOTE The recommended settings for a product installed in a kitchen are 37˚F for the refrigerator compartment and 0˚F for the freezer. Setting cooling temperatures Select the compartment where you want to change the temperature by pressing the Freezer or Refrigerator buttons at the top of the appliance control display. Press the + or - buttons to adjust the temperature to the desired setting. The temperature setting will begin to blink with the first touch. The display will time out after 10 seconds and return to the basic display.
![](/manual_guide/products/electrolux-erfg2393as-complete-owners-guide-a3048fe/19.png)