Electrolux ERFG2393AS Complete Owners Guide - Page 32

More about your Advanced, Water Filter

Page 32 highlights

32 FILTER REPLACEMENT 5. Push firmly until the cartridge snaps into place (you should hear a click as the cartridge engages the snap-in connector). 6. Press a drinking glass against the water dispenser while checking for any leaks at the filter housing. Any spurts and sputters that occur as the system purges air out of the dispenser system are normal. 7. After filling one glass of water, continue flushing the system for about 4 minutes. 8. Turn On the ice maker(s). 9. Press and hold WATER FILTER on the appliance control display for 3 seconds. When the display changes from red to green, the status has been reset. Ordering replacement filters Order new filters online at Electrolux.com, by calling toll-free at 1-877-435-3287, or by visiting the dealer where you purchased your unit.. You may want to consider ordering extra filters when you first install your refrigerator. Here is the product number to request when ordering: PureAdvantage™ PWF-1™ Water & Ice Refrigerator Filter Part# EPPWFU01 More about your Advanced Water Filter The PureAdvantage ice and water filter system is tested and certified to NSF/ANSI Standards 42, 53, 401 and CSA B483.1 for the reduction of claims specified on the performance data sheet. Visit Electrolux.com for more information. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Use systems certified for cyst reduction on disinfected waters that may contain filterable cysts. Test & certification results: • Rated Capacity - 125 gal/453 L for PureAdvantage and ice and water filter • Rated service flow - .50 gal/min. • Operating Temp.: Min. 33°F, Max. 100°F • Maximum Rated Pressure - 100 lbs/in.² • Recommended Minimum Operating Pressure: 30 lbs/in²  NOTE When you order your replacement filter, please reorder the same filter type currently in your refrigerator.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

32
FILTER REPLACEMENT
Do not use with water that is microbiolog-
ically unsafe or of unknown quality without
adequate disinfection before or after the
system. Use systems certified for cyst reduc-
tion on disinfected waters that may contain
filterable cysts.
Test & certification results:
Rated Capacity - 125 gal/453 L for
PureAdvantage
and ice and water filter
Rated service flow - .50 gal/min.
Operating Temp.: Min. 33°F,
Max. 100°F
Maximum Rated Pressure - 100 lbs/in
Recommended Minimum Operating
Pressure: 30 lbs/in
²
Ordering replacement filters
Order new filters online at Electrolux.com,
by calling toll-free at 1-877-435-3287, or by
visiting the dealer where you purchased your
unit.. You may want to consider ordering extra
filters when you first install your refrigerator.
Here is the product number to request
when ordering:
PureAdvantage™ PWF-1™
Water & Ice Refrigerator Filter
Part#
EPPWFU01
More about your Advanced
Water Filter
NOTE
When you order your replacement filter,
please reorder the same filter type
currently in your refrigerator.
The
PureAdvantage
ice and
water filter system is tested
and certified to NSF/ANSI
Standards 42, 53, 401 and CSA
B483.1 for the reduction of claims
specified on the performance
data sheet. Visit Electrolux.com
for more information.
5.
Push firmly until the cartridge
snaps into place (you should hear a
click as the cartridge engages the
snap-in connector).
6.
Press a drinking glass against the
water dispenser while checking for any
leaks at the filter housing. Any spurts
and sputters that occur as the system
purges air out of the dispenser system
are normal.
7.
After filling one glass of water, con-
tinue flushing the system for about
4
minutes
.
8.
Turn
On
the ice maker(s).
9.
Press and hold
WATER FILTER
on the
appliance control display for 3 sec-
onds. When the display changes from
red to green, the status has been reset.