Electrolux EW30DS80RS Complete Owner s Guide English - Page 42

42 Setting Oven Controls Adjusting the Oven Temperature This appliance has been factory calibrated and tested to ensure accurate baking temperatures. For the first few uses, follow all recipe times and temperature recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, the control may be adjusted so the oven cooks hotter or cooler than the temperature displayed. The oven temperature may be increased or decreased ±35°F (±19°C) by adjusting the User Programmable Offset (UPO). To offset the oven temperature by -30°F (-17°C): 1. Press user pref until UPO appears in the upper or lower display. 2. To decrease the oven temperature by 30ºF, press -lo until -30 appears. -30 3. To accept change, press START enter. Each oven cavity can be set with its own unique UPO setting. 4. When finished, press CANCEL off to return the oven to an idle mode. IMPORTANT! Do not use oven thermometers such as those found in grocery stores to check oven temperature. These thermometers may vary as much as 20ºF to 40ºF from actual oven temperatures. How to offset the oven temperature by +30°F: 1. Press user pref until UPO appears in the upper or lower display. The default setting of 0 should display next to UPO. 2. To increase the oven temperature by 30ºF, press +hi until 3 0 appears next to UPO. 30 Oven temperature adjustments made by changing the UPO setting will not affect the broil or self clean feature temperatures. Do not use oven thermometers such as those found in grocery stores to check the temperature setting inside the oven. These thermometers may display temperatures that vary greatly from the actual temperature. 3. To accept change, press START enter. 4. When finished, press CANCEL off to return the oven to an idle mode.