Epson 3LCD User Manual - Page 13

Adjusting the Sync, from the image. - remote

Get Epson 3LCD - PowerLite S4 Projector PDF manuals and user guides
UPC - 010343857827
View all Epson 3LCD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Adjusting the Image Quality 13 2 Adjust the tracking until the vertical stripes disappear from the image. Adjusting the Sync If flickering, fuzziness or interference appear in computer or RGB video images, and this cannot be fixed using automatic setup, you will need to adjust the Sync (synchronization) manually using the following procedure. 1 Select "Signal" from the configuration menu, and then select "Sync.". Check the buttons you can use and the operations they perform in the guide at the bottom of the screen. Using the remote control Using the control panel Using the remote control Using the control panel The tracking value increases or decreases each time a button is pressed. 3 Press the [Menu] button to exit the configuration menu. p The image will flash when continuous tracking adjustment is carried out, but this is normal. 2 Adjust the synchronization until the horizontal noise disappears from the image.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
13
Adjusting the Image Quality
2
Adjust the tracking until the vertical stripes disappear from the
image.
The tracking value increases or decreases each time a button is
pressed.
3
Press the [Menu] button to exit the configuration menu.
Adjusting the Sync
If flickering, fuzziness or interference appear in
computer or RGB video images, and this cannot be
fixed using automatic setup, you will need to adjust
the Sync (synchronization) manually using the
following procedure.
1
Select "Signal" from the configuration
menu, and then select "Sync.".
Check the buttons you can use and the operations they perform in the
guide at the bottom of the screen.
2
Adjust the synchronization until the horizontal noise disappears
from the image.
p
The image will flash when continuous tracking adjustment is carried out,
but this is normal.
Using the remote control
Using the control panel
Using the remote control
Using the control panel