Epson 3LCD User Manual - Page 47
Problem Solving, Reading the Indicators
UPC - 010343857827
View all Epson 3LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Problem Solving 47 Problem Solving If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below. If the indicators do not show clearly what the problem might be, see "When the Indicators Provide No Help" on page 50. Reading the Indicators The projector is provided with the following three indicators which indicate the operating status of the projector. Indicates the operating status of the projector. Orange: Standby condition Projection starts again when the [Power] button is pressed. You can disconnect the power plug from the electrical outlet when the status light is in this condition. Green : Warm-up in progress Warm-up time is approximately 30 seconds. After warm-up is complete, the indicator will stop flashing. Green : Projection in progress Indicates the projection lamp status. Indicates the internal temperature status. The following tables show what the indicators mean and how to remedy problems that they indicate. If all indicators are switched off, check that the power cable is connected correctly and that power is being supplied normally. Power indicator lights red Status Power Red Red Red Cause Internal error Remedy or Status Stop using the projector, disconnect the power cable from the electrical outlet, and contact Epson (see page 57).