Epson 7850p Product Information Guide - Page 18

2. Click the Extension button. You see this screen: EPSON PowerLite 7850p Projector The IP address appears in the Projector list and a searching icon displays. Click here Indicates search in progress 3. Click Use IP connect mode, then click OK. You see this screen: 4. Click IP connection. You see this screen: 5. Enter the projector's IP address and click Search. If the search fails to find a projector with the specified IP address, the searching icon turns into a question mark. If this happens, run EasyMP to check the projector's IP address, then repeat this step. Note: If you still don't see the projector, make sure the Internet Connection Firewall is disabled. 6. Click the projector you want to connect to, then click the Connect button. If more than one projector is listed, you can select additional projectors and connect to them at the same time. 7. If you are prompted for a keyword, enter the four-digit number displayed on the EasyMP Network screen and click OK. Managing Projectors from a Remote Computer The EasyManagement software lets you monitor and control projector(s) from a remote computer. These features are intended for use by network administrators. ❏ Use EMP Monitor to see your projectors' status, switch image sources, and control basic settings. ❏ Use the mail notification function to receive e-mail alerts about possible problems. ❏ Use a network management utility running SNMP, such as HP OpenView,™ to manage your facility's equipment from a pre-existing system. Note: A plug-in is available to allow you to manage your projectors in HP OpenView. Additionally, other SNMP management utilities may be available in the future. Check with your dealer or EPSON for availability. 6/03 EPSON PowerLite 7850p Projector - 17