Epson 830p User Manual - Page 75
Customizing Projector Features, Remote Monitoring Setup Options, Miscellaneous Setup Options
UPC - 010343851177
View all Epson 830p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Customizing Projector Features You can use the menu system to turn standby mode on or off, adjust the network settings, change the language, and customize the way the projector displays images. Remote Monitoring Setup Options These options let you set up the projector so it can be monitored and controlled from a remote computer (see page 80). ■ Standby Mode (in the Extended menu) Select Network ON to enable the projector to be monitored over a network when it's in standby mode. ■ If you want to monitor the projector using a network management utility, select SNMP in the Network menu and enter at least one trap IP address. note When Standby Mode is set to Network ON, the exhaust fan continues to operate after the projector has cooled down. This is normal. Miscellaneous Setup Options ■ Projection (in the Extended menu) Select Front (to project from the front of a screen and right side up), Front/Ceiling (when the projector is mounted upside-down from the ceiling), Rear (to project from behind onto a transparent screen), or Rear/Ceiling (to project from behind onto a transparent screen when the projector is mounted upside-down from the ceiling). ■ Language (in the Extended menu) Select from nine languages to be used for the projector menus. Enabling Sleep Mode In Sleep Mode, the projector automatically turns off the lamp when it has not received any signals from connected sources for 30 minutes. This conserves electricity, cools the projector, and extends the life of the lamp. When you want to start projecting again, just press the P Power button. In the Extended menu, select Operation, Sleep Mode, and choose ON or OFF. Fine-Tuning the Projector 75