Epson ActionPrinter 2000 User Manual - Page 17
they do not interfere with paper feeding. If possible, secure, sure that you allow enough clearance
View all Epson ActionPrinter 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Choosing a Place for the Printer Note: If you plan to use a printer stand, follow these guidelines: Use a stand that supports at least 11.6 kg (25½, lbs), which is twice the weight of the printer. Never use a stand that tilts the printer at an angle of more than 15 degrees from horizontal. If you install a cut-sheet feeder, keep your printer absolutely level. If you position the paper supply below the printer stand, make sure that you allow enough clearance (25 mm or 1 inch) to keep the paper from catching on the underside of the stand. Also see that the distance between the stand's supports is at least 280 mm (11 inches), to accommodate any paper size you may use. Position your printer's power cord and interface cable so that they do not interfere with paper feeding. If possible, secure the cables to the printer stand. 1-4 Setting Up the Printer