Epson ActionPrinter 2000 User Manual - Page 85
Printed characters are not what you expected., The print position is not what you expected.
View all Epson ActionPrinter 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Printing Printed characters are not what you expected. • The typestyle or characters that are set by your software cannot be printed. Check that the software is correctly installed for your printer. • The font selected by SelecType does not print. Your software may be overriding your SelecType setting. Check the printing style set in your software. • The wrong characters are printed. The wrong character table or the wrong international character set may be selected. Check the DIP switch settings. See the section on DIP switches in Chapter 3. Also, you may be using the wrong cable or your cable may not be properly connected. The print position is not what you expected. • Printing starts too high or too low on the page. Adjust the top margin set by your application software. • All the text is printed on the same line. Set DIP switch 2-4 off. • Page length does not match the length of the paper. Change the page-length setting with DIP switches 1-3 and 1-4. See the section on DIP switches in Chapter 3. Check the page length set by your application software and adjust it if necessary. 6-6 Troubleshooting