Epson ActionPrinter 2250 User Manual - Page 18
CAUTION, Setting Up the Printer, shaft shown below. They have already been adjusted
View all Epson ActionPrinter 2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installing the Ribbon Cartridge 2. Turn the ribbon-tightening knob in the direction of the arrow to remove any slack in the ribbon. Insert the ribbon cartridge into the printer as shown; then press both sides of the cartridge firmly to fit the plastic posts into the slots. 3. Turn the ribbon-tightening knob to feed the ribbon into place. Make sure it is not twisted or creased. 0? ' CAUTION: l l Never move the small levers on the ends of the metal shaft (shown below). They have already been adjusted at the factory. Never move this lever. l Disregard the numbers 0 and 1 under the printer cover on the left side. They are not necessary for printer operation. 1-6 Setting Up the Printer
Installing the Ribbon Cartridge
2.
Turn the ribbon-tightening knob in the direction of the arrow to
remove any slack in the ribbon. Insert the ribbon cartridge into
the printer as shown; then press both sides of the cartridge
firmly to fit the plastic posts into the slots.
3.
Turn the ribbon-tightening knob to feed the ribbon into place.
Make sure it is not twisted or creased.
0’
?
CAUTION:
l
l
Never move the small levers on the ends of the metal
shaft (shown below). They have already been adjusted
at the factory.
Never move this lever.
l
Disregard the numbers 0 and 1 under the printer cover
on the left side. They are not necessary for printer
operation.
1-6
Setting Up the Printer