Epson ActionPrinter 2250 User Manual - Page 64
Power supply, Printing, READY
View all Epson ActionPrinter 2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Troubleshooting Power supply Power is not being supplied. l The lights on the control panel do not go on. Check that the power cord is properly plugged into the electrical outlet. If the electrical outlet is controlled by an outside switch or automatic timer, use a different outlet. Plug another electrical device into the outlet to determine whether the outlet is operating properly. l The lights come on briefly and then go off The lights stay off even when the power is turned on again. Check that the printer's voltage rating matches the voltage of your electrical outlet. If the voltages do not match, unplug the printer and contact your dealer immediately. Do not reconnect the power cord to an electrical outlet. Printing The printer does not print. l The READY light is on but nothing is printed. Check that the software is installed properly for your printer. Check the software's printer settings. Check both ends of the interface cable between the printer and the computer. Make sure this cable is a shielded twistedpair parallel cable that meets both the printer and computer specifications. l The READY light is/lashing. The printer may be out of paper. Load paper in the printer. 3-20 Using the Printer