Epson ActionPrinter 2250 User Manual - Page 82
Initialization, The power is turned on.
View all Epson ActionPrinter 2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Technical Specifications Interface timing The figure below shows the timing for the parallel interface. BUSY ACKNLG DATA STROBE Initialization The printer can be initialized (returned to a fixed set of conditions) in three ways: Hardware initialization Software initialization l The power is turned on.* The printer receives an INIT signal from the parallel interface (pin 31 goes LOW). l Software sends the ESC @ (initialize the printer) command. Appendix A-11
Technical Specifications
Interface timing
The figure below shows the timing for the parallel interface.
BUSY
ACKNLG
DATA
STROBE
Initialization
The printer can be initialized (returned to a fixed set of conditions) in three ways:
Hardware initialization
l
The power is turned on.-
*
The printer receives an INIT signal from the parallel
interface (pin 31 goes LOW).
Software initialization
l
Software sends the ESC @ (initialize the printer)
command.
Appendix
A-11