Epson ActionPrinter 2250 User Manual - Page 70
READY, does not feed backward to the paper-park position
View all Epson ActionPrinter 2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Troubleshooting l The paper does not eject properly. The page may be too long. Tear off the fresh supply of paper and eject the page from the printer. Use only paper that is within the specified length range described in the Appendix. l When you switch between single sheets and continuous paper, the beeper sounds several times and the READY light goes off You may have tried to change the paper-release lever position while paper remained in the printer. Return the paper-release lever to the previous position and eject paper (or feed paper to the paper-park position). Then change the paper-release lever position. l The paper does not feed backward to the paper-park position or the tearoff feature does not work. You may have set the back-feed setting in the default-setting mode to Disable. Set the back-feed setting to Enable. See "Changing the default settings" on page 3-7. However, when you print on labels, make sure you set the back-feed setting to Disable. 3-26 Using the Printer