Epson ActionPrinter 2250 User Manual - Page 24
Put the cable through the cable clip; then insert the clip in
View all Epson ActionPrinter 2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Connecting the Printer to Your Computer 2. Squeeze the wire clips together until they lock in place on either side. Note: If your cable has a ground wire, connect it to the ground connector below the interface connector. I 3. Put the cable through the cable clip; then insert the clip in the slot on the bottom of the printer. (You may have to remove the output guide when you put the printer upright to attach the cable clip.) 1-12 Setting Up the Printer
Connecting the Printer to
Your
Computer
2.
Squeeze the wire clips together until they lock in place on either
side.
Note:
If your cable has a ground wire, connect it to the ground
connector below the interface connector.
3.
Put the cable through the cable clip; then insert the clip in the
slot on the bottom of the printer. (You may have to remove the
output guide when you put the printer upright to attach the
cable clip.)
I
1-12
Setting Up the Printer