Epson ActionPrinter 2250 User Manual - Page 54
LF/FF, READY, to set the feature.
View all Epson ActionPrinter 2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Using the Default-Setting Mode 7. Press the LF/FF button to change the setting. The READY light turns on or off to show your selection, as indicated in Table B, and your new setting is saved automatically and remains in effect until you change it. If you are changing the character table, page length, or TOF position, go to step 8 next. Otherwise, go to step 9. 8. If you are changing the character table, page length, or TOF position, you must make additional settings as shown in the tables below. Press the LF/FF button until light 1, light 2, and the READY light indicate your selection. Then press the FONT button to set the feature. Once you press the FONT button, the printer advances to the next item in table B and your setting is saved automatically. The new setting remains in effect until you change it. 3-10 Using the Printer