Epson ActionPrinter 2250 User Manual - Page 19
Plugging in the Printer
View all Epson ActionPrinter 2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing the Ribbon Cartridge 4. Replace the printer cover by inserting its tabs into the holes on the printer as shown below; then close the cover. Plugging in the Printer 1. Make sure the power switch on the printer is turned off. It is off when the 0 side of the switch is pressed down. 2. Check the label on the back of the printer to make sure the voltage required by the printer matches that of your electrical outlet. 01l CAUTION: If the rated voltage and your outlet voltage do not match, contact your dealer for assistance. Do not plug in the power cord. Setting Up the Printer 1-7
Installing the Ribbon Cartridge
4.
Replace the printer cover by inserting its tabs into the holes on
the printer as shown below; then close the cover.
Plugging in the Printer
1.
Make sure the power switch on the printer is turned off. It is off
when the
0
side of the switch is pressed down.
2.
Check the label on the back of the printer to make sure the
voltage required by the printer matches that of your electrical
outlet.
0
1
CAUTION:
If the rated voltage and your outlet voltage do
l
not match, contact your dealer for assistance. Do not plug
in the power cord.
Setting Up the Printer
1-7