Epson BrightLink Pro 1470Ui Users Guide - Page 309
Event ID code, Cause and solution, Adjust Image Quality
View all Epson BrightLink Pro 1470Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 309 highlights
Event ID code 0038 0042 0041 0043 0432 0435 0434 0481 0482 0485 0433 0484 0483 04FE 0479 04FF 0891 0892 0893 0894 0898 Cause and solution Wireless LAN system mismatch. Check the wireless LAN system for the mobile device and the projector, and then reconnect. Connection failed. Delete the recorded projector information on your computer and try connecting again. The video format is not supported. Change the resolution of the mobile device, and then reconnect. Or change the Adjust Image Quality setting for the projector, and then reconnect. The network software did not start. Turn the projector off and then on again. Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again. Cannot display the transferred images. Restart the network software. Communication with computer was disconnected. Restart the network software. The network software quit unexpectedly. Check the network communication status, then turn the projector off and then on again. A projector system error has occurred. Turn the projector off and then on again. Cannot find the SSID (network name). Make sure your computer and projector are connected to your access point's current SSID. The WPA/WPA2 authentication type does not match. Make sure the wireless network security settings are correct. The WEP/TKIP encryption type does not match. Make sure the wireless network security settings are correct. Communication with unauthorized access point was disconnected. Contact your network administrator. Failed to acquire DHCP address. Make sure the DHCP server is operating correctly. If you are not using DHCP, turn off the DHCP setting in the Network menus. 309