Epson BrightLink Pro 1470Ui Users Guide - Page 341
Solutions When the Image Brightness or Colors are Incorrect, Color Saturation
View all Epson BrightLink Pro 1470Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 341 highlights
Related references Input Signal Settings - Signal Menu Image Quality Settings - Image Menu Related tasks Focusing the Image Solutions When the Image Brightness or Colors are Incorrect If the projected image is too dark or light, or the colors are incorrect, try the following solutions: • Press the Color Mode button on the remote control to try different color modes for the image and environment. • Check your video source settings. • Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, White Balance, and/or Color Saturation. • Make sure you selected the correct Input Signal or Video Signal setting on the Signal menu, if available for your image source. • Make sure you selected the correct Gamma or RGBCMY setting in the Image menu. • Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting shorter cables. • Make sure the Brightness Settings in the ECO menu is set correctly. • Position the projector close enough to the screen. • If the above solutions do not correct your image, try resetting all of the projector's settings using the Reset menu. Parent topic: Solving Image or Sound Problems Related references Input Signal Settings - Signal Menu Projector Setup Settings - ECO Menu Image Quality Settings - Image Menu Related topics Connecting to Computer Sources Connecting to Video Sources 341