Epson BrightLink Pro 1470Ui Users Guide - Page 338

Solutions When Only a Partial Image Appears If only a partial computer image appears, try the following solutions: • Make sure the Resolution setting in the Signal menu is set correctly for the input signal. • Try adjusting the image position using the Position menu setting. • Press the Aspect button on the remote control to select a different image aspect ratio. • If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button until the projector returns to a full display. • Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.) • Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.) • Make sure you selected the correct Projection setting. • Try adjusting the image position using the Image Shift setting. • If you are passing the video signal through another device, make sure the device is set up correctly, then try connecting the video source directly to the projector. Parent topic: Solving Image or Sound Problems Related references Input Signal Settings - Signal Menu Related tasks Changing the Image Aspect Ratio Zooming Into and Out of Images Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions: • If the projector is not mounted on the wall or ceiling, place it directly in front of the center of the screen, facing it squarely, if possible. • Use the Image Shift setting to adjust the image position, rather than moving the projector. • Press the keystone buttons on the projector to adjust the image shape. • Adjust the image shape using the Geometry Correction menu settings. 338