Epson EMP 71 Instruction Manual - Page 31
Adjusting the Focus, Keystone Correction (Using Projector Button), upward or downward by roughly 15°.
![]() |
View all Epson EMP 71 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Adjusting the Focus This section describes how to adjust the video focus. 1. Turn the focus ring on the projector to adjust the focus. Tip: • Focus cannot be achieved if the lens is dirty or covered with condensation. Wipe off any dirt or condensation (See page 64). • If adjustment does not succeed, make sure the setup distance is between 39.37inches (1.0m) and 515.75inches (13.1m). Keystone Correction (Using Projector Button) When the foot adjust levers are used to change the projection angle, the keystone correction function can be used to correct trapezoidal distortion upward or downward by roughly 15°. 1. Press the Keystone button on the projector to minimize the trapezoidal distortion. Tip: • A keystone correction reduces screen size. • The keystone correction is stored in memory. You will need to readjust the image if the projector is moved to a different location or the projection angle is changed. • If a keystone correction makes the image noticeably uneven, reduce the video sharpness with the menu commands Video > Sharpness (See page 44). 29
![](/manual_guide/products/epson-emp-71-instruction-manual-92312d1/31.png)