Epson EMP 71 Instruction Manual - Page 60
Image is Unclear, Output and Providing Output to an Externally Connected - review
View all Epson EMP 71 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Carefully review sections such as "Providing External Output" and "Providing Output to an Externally Connected Monitor" in the instruction manual of the connected computer. Image is Unclear • Blurry image • Image only partially focused • Not focused at all • Is the focus adjusted correctly? See page 29 • Is the projection distance optimal? See page 16 The recommended projection distance is 39.37inches (1.0m) to 515.75inches (13.1m). Set up the projector in this range. • Is the lens dirty? See page 64 • Is the projection beam facing the screen directly? See page 14 • Is the lens covered with condensation? If you carry the projector from a cold room into a warm room, the lens may become covered with condensation and the image may be blurred. After a short period, the image should return to normal. • Press the Auto button on the remote control. See page 30 • Have you adjusted Sync.*, Tracking*, and Position? See page 43 Use the menu to adjust. • Are the video signal mode settings correct? See page 44 Use the Menu > Video > Mode menu items to select a video signal format. Auto detection according to video signal input is not always possible. • Are the computer/component video signal settings correct? See page 44 Select the correct input signal settings by selecting Menu > Video > Input Signal. RGB: Computer images YUV*: Color difference images YCbCr*: DVD images YPbPr*: HDTV images 58