Epson ET-2760 Users Guide - Page 153
Print Head Nozzle Check, Power Cleaning, Print head is clean, Parent topic, Related concepts
View all Epson ET-2760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
6. Press the start button to print. The nozzle check pattern is printed. 7. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 8. Do one of the following: • If there are no gaps, the print head is clean. Select No and press the OK button. • If there are gaps or the pattern is faint, select Yes and press the OK button. Follow the instructions on the screen to clean the print head. If you don't see any improvement after cleaning the print head up to 3 times, turn the product off and wait at least 12 hours. Then try cleaning the print head again. If quality still does not improve, run a Power Cleaning. If there is still no improvement, contact Epson support. Parent topic: Print Head Nozzle Check Related concepts Power Cleaning 153