Epson Perfection 600 Quick Start - Page 13
Transparency Unit
View all Epson Perfection 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3. Insert the interface board into an empty 16-bit ISA expansion slot; then secure it with the retaining screw. 4. Replace the computer cover and reconnect all cables. 5. If you're installing the optional transparency unit, go to "Install the Optional Transparency Unit" on page 18. UNLOCK THE SCANNER 1. Remove the document cover and turn the carriage lock to the unlock position (away from the document table). 2. Reinstall the document cover as described on page 28. (If you purchased the optional transparency unit, install it now. Follow the instructions in "Install the Optional Transparency Unit" on page 18.) Caution: Always lock the scanner carriage before transporting it; otherwise, the scanner may be damaged. Be sure the scanner lamp is in the home position; to ensure this, always turn off the scanner before locking the carriage. home position 9