Epson PictureMate Snap - PM 240 Product Information Guide - Page 13

PictureMate Snap (PM 240) You can buy a PictureMate 200 Series Print Pack wherever PictureMate is sold or from retailers that sell printer supplies. You can also buy a Print Pack and other PictureMate accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). Note: Use your photo cartridge within six months of installing it and before the expiration date on the package. Removing and Installing a Photo Cartridge Make sure you have a new PictureMate 200 Series Print Pack before you remove the old photo cartridge. Once you remove the cartridge, you must install the new one right away. 1. Make sure PictureMate is on but not printing. 2. Open the cartridge door on the back of PictureMate. 4. Pull out the cartridge and dispose of it properly. (For appropriate disposal, check local resources for recycling guidelines.) Warning: Keep photo cartridges out of the reach of children and do not drink the ink. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them thoroughly with water. If discomfort or vision problems continue after flushing, see a doctor immediately. 5. Remove the new photo cartridge from its package. Don't touch the green chip 3. Slide the cartridge lever left, to the Release position. Caution: Don't touch the small green circuit board. Install the photo cartridge immediately after you remove it from its package. If you leave a cartridge unpacked for a long time before using it, normal printing may not be possible. 6. Slide the cartridge straight into the slot, label side up, until it clicks in place. Caution: Do not try to pull out the cartridge without moving the lever. Note: The cartridge won't go in all the way. You need to use the cartridge lever to lock it in place. 8/06 PictureMate Snap (PM 240) - 13