Epson PictureMate Snap - PM 240 Product Information Guide - Page 2
Mechanical, Electrical, AC Adapter, Environmental, Memory Card Slots, Computer USB Interface
View all Epson PictureMate Snap - PM 240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
PictureMate Snap (PM 240) Mechanical Paper path Sheet feeder capacity Dimensions Weight Printable area Sheet feeder, top entry 20 sheets Storage Width: 8.5 inches (215 mm) Depth: 6.0 inches (152 mm) Height: 5.7 inches (145 mm) Printing (with paper support and output tray open) Width: 8.5 inches (215 mm) Depth: 13.3 inches (339 mm) Height: 10.3 inches (261 mm) 5.3 lb (2.4 kg) without photo cartridge, AC adapter, or optional battery Border printing: 0.12 inch (3 mm) margin on all sides of the paper Borderless printing: no margins Electrical Input voltage range 110 to 120 V or 220 to 240 V Power consumption (approximate) Printing 19.0 W Sleep mode 4.0 W Powered off 0.4 W Note: Check the label on the bottom of PictureMate for voltage information. AC Adapter Model Rated voltage Input voltage range Rated frequency Input frequency range Rated current Rated electrical power Output A381H AC 100 to 240 V AC 90 to 264 V 50 to 60 Hz 49.5 to 60.5 Hz 0.4 to 0.8 A 42 W 20 VDC, 1.68 A Environmental Temperature Humidity Operation: 50 to 95 °F (10 to 35 °C) Storage: -4 to 140 °F (-20 to 60 °C) 1 month at 104 °F (40 °C) Operation: 20 to 80% RH Storage (in shipping container): 5 to 85% RH (without condensation) Memory Card Slots Card slots Voltage requirements CF Type II card slot Compatible with "CF+ and CompactFlash™ Specification 2.0" Sony Memory Stick®/ MemoryStick PRO™/ Duo (requires adapter) card slot Compatible with "Memory Stick Standard version 1.40-00" Compatible with "Memory Stick Standard Memory Stick PRO Format Specifications version 1.01-00" SD™ (Secure Digital)/ MMC™ (MultiMediaCard™) card slot Compatible with "SD Memory Card Specifications / PART1. Physical Layer Specification Version 2.0" Compatible with "MultiMediaCard System Specifications Version 3.31 cards" xD-Picture Card™ slot Compatible with "xD-Picture Card Card Specification Version 1.20 Type M Card/Type H Card" 3.3 V 3.3 V/5 V combined use Maximum current is 500 mA Computer USB Interface Connectivity Bit rate Connector type Data Encoding Recommended cable length Universal Serial Bus Specifications Revision 2.0 Universal Serial Bus Specifications Revision 1.1 480 Mbps (High speed device) USB Series B NRZI Less than 6 feet (1.8 meters) External Device Interface Connectivity Bit rate Connector type Data Encoding Recommended cable length Universal Serial Bus Specifications Revision 2.0* 480 Mbps (High speed device) USB Series A NRZI Less than 6 feet (1.8 meters) * Not all USB devices are supported. Safety Approvals Safety EMC UL 60950-1 CSA C22.2 No. 60950-1 FCC part 15 Subpart B class B CSA C108.8 Class B 2 - PictureMate Snap (PM 240) 8/06