Epson PowerLite 1725 User's Guide - Page 120

Replace the lamp cover, then tighten its screw.

Get Epson PowerLite 1725 PDF manuals and user guides View all Epson PowerLite 1725 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 120 highlights

note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 6. Hold the lamp as shown and pull it straight out. 7. Gently insert the new lamp. (If it doesn't fit easily, make sure it is facing the right way.) 8. Push down the side marked PUSH until it snaps in. 9. Once the lamp is fully inserted, tighten its screws. 10. Replace the lamp cover, then tighten its screw. 11. Slide out the air filter on the bottom of the projector and remove it. 12. Slide in the new air filter until it clicks in place. 13. Reset the lamp timer as described in the next section. 120 Maintaining the Projector

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
120
Maintaining the Projector
6.
Hold the lamp as shown and pull it straight out.
7.
Gently insert the new lamp. (If it doesn’t fit easily, make sure it is
facing the right way.)
8.
Push down the side marked
PUSH
until it snaps in.
9.
Once the lamp is fully inserted, tighten its screws.
10.
Replace the lamp cover, then tighten its screw.
11.
Slide out the air filter on the bottom of the projector and
remove it.
12.
Slide in the new air filter until it clicks in place.
13.
Reset the lamp timer as described in the next section.
note
The lamp(s) in this
product contain mercury.
Please consult your state and
local regulations regarding
disposal or recycling. Do not
put in the trash.