Epson PowerLite 1725 User's Guide - Page 38

Setting the Remote Control ID, button on the remote control.

Get Epson PowerLite 1725 PDF manuals and user guides View all Epson PowerLite 1725 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

2. Press the ID button on the remote control. You see a message on the screen, showing the projector's ID: If the message says the remote control is "On," then you can use the remote control to operate that projector. If it says "Off," then you have to change the ID of the remote control before operation is possible, as described in the next section. note If you're using a remote control ID other than the default ID of zero, you have to set the ID each time you turn on the projector. Setting the Remote Control ID The remote control's default ID is zero. This lets it operate any projector. To set it to operate only those projectors with a specific ID, follow these steps: 1. Press and hold the ID button on the remote control. 2. While holding the ID button, press the numbered button on the remote control (1 through 9) that corresponds to the ID of the projector(s) you want to operate. Selecting zero lets you control all projectors. 38 Using the Remote Control

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
38
Using the Remote Control
2.
Press the
ID
button on the remote control. You see a message on
the screen, showing the projector’s ID:
If the message says the remote control is “On,” then you can use
the remote control to operate that projector. If it says “Off,” then
you have to change the ID of the remote control before operation
is possible, as described in the next section.
Setting the Remote Control ID
The remote control’s default ID is zero. This lets it operate any
projector. To set it to operate only those projectors with a specific ID,
follow these steps:
1.
Press and hold the
ID
button on the remote control.
2.
While holding the
ID
button, press the numbered button on the
remote control (1 through 9) that corresponds to the ID of the
projector(s) you want to operate. Selecting zero lets you control all
projectors.
note
If you’re using a remote
control ID other than the
default ID of zero, you have
to set the ID each time you
turn on the projector.