Epson PowerLite 1725 User's Guide - Page 134
Solving Network Problems
View all Epson PowerLite 1725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
of the screen). On a Mac, you may be able to adjust the volume from your menu bar (top right corner of the screen) or via the volume control function keys. ■ If you are using the projector's internal speaker, make sure the EasyMP Audio Out option is set to Internal. ■ If you are using external speakers, you need to set the EasyMP Audio Out option to External. See page 51 or page 105 for more information. Solving Network Problems You can't display an image using Quick Wireless Connection. You may need to restart your computer to connect. You can't connect to the projector using NS Connection. ■ Make sure the wireless module is installed correctly in the projector, as shown on the Quick Setup sheet. ■ Restart your computer. ■ Make sure your projector and computer are configured correctly; see page 58 (Ad Hoc mode) or page 64 (Access Point mode). ■ Make sure that you have sufficient wireless signal strength (above 50 percent). On a Mac, check the AirPort icon on the Mac menu bar. In Windows, see the documentation for your computer's wireless card or adapter for details. ■ Make sure you aren't projecting one of the EasyMP configuration screens. (You should see a message that the projector is ready to connect.) If you have to exit a configuration screen, restart NS Connection. ■ If the projector is configured for Access Point mode and you're using DHCP, allow time for your projector to appear. It takes the server a little while to pick up the IP address. 134 Solving Problems