Epson PowerLite 1725 User's Guide - Page 90
Connecting to a Wired Network
View all Epson PowerLite 1725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
note Only the Epson Ethernet unit is guaranteed to work. Other brands may not be compatible. If you see a message asking you to insert a LAN or memory card, check to make sure your Ethernet unit is properly inserted. Connecting to a Wired Network With the optional Ethernet unit, you can connect the projector to your network and configure it with an IP address. This provides an alternative to connecting to the projector wirelessly. 1. Remove the wireless module and cover plate, as described above, then insert the Ethernet unit into the projector and replace the cover plate. 2. Connect the projector to your network using a commercially available 100BaseTX or 10BaseT network cable. Connect the cable to the LAN port on the projector. 3. Point the remote control at the projector and press the PPower button. 4. Press the EasyMP button on the remote control to select EasyMP as the source. 5. Press the Menu button on the remote control, select the Network menu, then press Enter. 6. Choose Network Configuration and press Enter. 7. Choose Wired LAN and press Enter. You see the following screen: 8. Do one of the following: 90 Setting Up Network Projection