Epson S6 User Manual - Page 101
USB Connection Setup, Set Extended - Link 21L to On from
View all Epson S6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
ESC/VP21 Commands 101 USB Connection Setup To control the projector with ESC/VP21 commands using communication via USB connection, it is necessary to set "Extended" - "USB Type B" from the configuration menu to something other than "USB Display". In addition to that, the following preparations are required. Procedure A Download the USB driver (USB-COM Driver) from the Epson Web site to your computer. Go to http://www.epson.com and select the support section of your local Epson Web site. B Install the downloaded USB driver onto your computer. Read the instructions displayed on the download screen. C Set "Extended" - "Link 21L" to "On" from the projector's configuration menu.
ESC/VP21 Commands
101
USB Connection Setup
To control the projector with ESC/VP21 commands using communication
via USB connection, it is necessary to set "Extended" - "USB Type B"
from the configuration menu to something other than "USB Display". In
addition to that, the following preparations are required.
A
Download the USB driver (USB-COM Driver) from
the Epson Web site to your computer.
Go to
and select the support section of your
local Epson Web site.
B
Install the downloaded USB driver onto your
computer.
Read the instructions displayed on the download screen.
C
Set "Extended" - "Link 21L" to "On" from the
projector’s configuration menu.
Procedure