Epson S6 User Manual - Page 79
Connecting and Removing a USB Device (EB-W6 only), Connecting a USB Device, Reading the Indicators,
View all Epson S6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Connecting and Removing a USB Device (EB-W6 only) 79 You can connect a digital camera, hard disk drive and USB memory compatible with USB 2.0 or 1.1. You can project image files from a connected digital camera or USB storage device in Slideshow. s p.90 Connecting a USB Device This section explains how to connect USB devices using the digital camera as an example. Connect with a specified USB cable or one supplied with the digital camera. q Use a USB cable of up to 3 meters in length. If the cable length is over 3 meters, the slideshow may not operate normally. USB cable To digital camera's USB port To USB port (Type A) Attention • Normal operation is not possible when using a USB hub. Connect the projector directly to a digital camera or USB storage device. • When connecting a USB compatible hard disk drive, be sure to use the hard disk drive's accessory AC adaptor. Reading the Indicators The USB indicator colors are lit as follows to indicate the status of the USB device connected to the projector. Indicators (orange) (green) : Lit : Off Status A USB device is connected. A Slideshow of images from the connected device is being played. A USB device is not connected. Removing a USB Device After finishing projecting, use the following procedure to remove USB devices from the projector. Procedure A Turn off power for the digital camera or USB device. B Remove from the projector's USB port (Type A).