Epson WorkForce WF-2860 Users Guide - Page 154
Rings to Answer, Proceed, Start Checking, Not Detect, Parent topic, Related references, Related tasks
View all Epson WorkForce WF-2860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
• If you do not have a distinctive ring service, select Skip and go to step 9. Note: Distinctive ring services allows you to have several phone numbers on one phone line. Each number is assigned a different ring pattern. You can use one number for voice calls and another for fax calls. Select the ring pattern assigned to fax calls in the Distinctive Ring Setting. If you select a ring pattern other than All, Receive Mode is automatically set to Auto. 7. On the Receive Mode Setting screen, do one of the following: • If you have connected an external telephone or answering machine to the product, select Yes and go to the next step. • If you did not connect an external telephone or answering machine, select No and go to step 9. (Receive Mode is automatically set to Auto; otherwise you cannot receive faxes.) 8. On the next Receive Mode Setting screen, select Yes to receive faxes automatically or select No to receive faxes manually. Note: If you connect an external answering machine and select to receive faxes automatically, make sure the Rings to Answer setting is correct. If you select to receive faxes manually, you need to answer every call and use the product's control panel or your phone to receive faxes. 9. On the Proceed screen, confirm the displayed settings and select Proceed, or press the back arrow to change the settings. 10. On the Run Check Fax Connection screen, select Start Checking and follow the on-screen instructions to check the fax connection and print a report of the check result. If there are any errors reported, try the solutions on the report and run the check again. 11. If the Select Line Type screen appears, select the correct line type. Note: If you are connecting the product to a standard phone line, select PSTN and then select Do Not Detect on the Confirmation screen that appears. However, selecting this setting may cause the product to drop the first digit of a fax number and send the fax to the wrong number. Parent topic: Setting Up Basic Fax Features Related references Basic Settings - Fax Related tasks Entering Characters on the LCD Screen Selecting the Line Type 154