Epson WorkForce WF-2860 Users Guide - Page 53
Wi-Fi Protected Setup (WPS), Using WPS to Connect to a Network
View all Epson WorkForce WF-2860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
6. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown. 7. When you are finished, scroll down on the product's LCD screen and select OK. Note: You can also scan the QR Code on the LCD screen to view online setup instructions. 8. Press the home button to return to the Home screen. The Wi-Fi Direct icon is displayed on the LCD screen and indicates if Wi-Fi Direct is enabled on the product. If you are printing from a computer, make sure you installed the network software as described on the Start Here sheet. Parent topic: Wi-Fi Direct Mode Setup Related references Status Icon Information Wi-Fi Protected Setup (WPS) If your network uses a WPS-enabled wireless router or access point, you can quickly connect your product to the network using Wi-Fi Protected Setup (WPS). Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details. Using WPS to Connect to a Network Parent topic: Wi-Fi or Wired Networking Using WPS to Connect to a Network If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network. 1. Press the home button, if necessary. 2. Select the icon. 53