Epson XP-4200 Users Guide - Page 182

Parent topic: Power Cleaning Related references Where to Get Help Related tasks Loading Paper in the Rear Paper Feeder Checking the Nozzles Using a Computer Utility Aligning the Print Head Using the Product Control Panel If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or light horizontal bands, you may need to align the print head. Note: Banding may also occur if your print head nozzles need cleaning. 1. Load a few sheets of plain paper in the product. 2. Press the home button, if necessary. 3. Select Maintenance > Print Head Alignment. 4. If your printout contains misaligned vertical lines or is blurry, continue with the next step. If your printout contains horizontal banding, go to step 7. 5. Select Vertical Alignment and follow the on-screen instructions to print an alignment sheet. 6. Check the printed pattern on the alignment sheet and for each set of patterns, select the number representing the pattern with the least amount of separation or overlap. 7. Select Horizontal Alignment and follow the on-screen instructions to print an alignment sheet. 8. Check the printed pattern on the alignment sheet and select the number representing the pattern with the least amount of separation or overlap. 9. Continue following the rest of the on-screen instructions to finish with the alignment. Parent topic: Adjusting Print Quality Related tasks Loading Paper in the Rear Paper Feeder Cleaning the Paper Guide If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink. 182