Epson XP-4200 Users Guide - Page 197

Running a Product Check Running a product check helps you determine if your product is operating properly. 1. Disconnect any interface cables connected to your product. 2. Make sure there are no errors on the LCD screen. 3. Load plain paper in the product. 4. Press the home button, if necessary. 5. Select Maintenance > Print Head Nozzle Check. 6. Select Print. The nozzle pattern prints. 7. Do one of the following, depending on the results of the product check: • If the page prints and the nozzle check pattern is complete, the product is operating properly. Any operation problem you may have could be caused by your computer, cable, software, or selected settings. Check the other solutions in this manual or try uninstalling and reinstalling your printer software. • If the page prints but the nozzle check pattern has gaps, clean the print head. • If the page does not print, the product may have a problem. Check the other solutions in this manual. If they do not work, contact Epson. Parent topic: Solving Problems Related concepts Uninstall Your Product Software Print Head Maintenance Related tasks Loading Paper in the Rear Paper Feeder Resetting Control Panel Defaults If you have a problem with settings on the product control panel, you can reset them to their factory defaults. You can choose which settings to reset or reset them all. 1. Press the home button, if necessary. 2. Select Settings. 3. Scroll down and select Restore Default Settings. 197