Epson XP-4200 Users Guide - Page 205

Network 5 GHz. See your router documentation or contact your internet service provider for instructions. • Try restarting your router following the instructions in your router documentation. Note: If you are reading these instructions online, you will lose your Internet connection when you restart your router. • Check to see if your wireless router or access point has an enabled Privacy Separator function that is preventing printing from a device over the network. See your router or access point documentation for instructions on disabling the Privacy Separator function. • Check your product's connection status by opening the EPSON Status Monitor 3 (Windows) or EPSON Status Monitor (Mac) on your computer. If the remaining ink levels are displayed, a connection has been successfully established between your computer and your product. • If you are printing a large data size image, the computer may run out of memory. Print the image at a lower resolution or a smaller size. Parent topic: Solving Network Problems Related references Status Icon Information Related tasks Printing a Network Status Sheet Printing a Network Connection Report Related topics Wi-Fi Networking Cannot Scan Over a Network If you have problems scanning over a network, try these solutions: • If you cannot scan from your product control panel, make sure you restarted your computer after installing the product software. Make sure the Event Manager program is not being blocked by your firewall or security software. Note: If you are using a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and 5 GHz) mode. If your router uses a single network name (SSID) for both the 2.4 GHz and 5 GHz band, give each band its own network name (SSID) instead, such as Home Network 2.4 GHz and Home 205