Epson XP-4200 Users Guide - Page 231
Scanned Image Quality Problems, Back of Original Image Appears in Scanned Image
View all Epson XP-4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
Image Consists of a Few Dots Only Line of Dots Appears in All Scanned Images Straight Lines in an Image Appear Crooked Characters are Not Recognized During Conversion to Editable Text (OCR) Image Colors are Patchy at the Edges Ripple Patterns Appear in an Image Scanned Image Edges are Cropped Resetting the Epson Scan 2 Settings Parent topic: Solving Problems Scanned Image Quality Problems If you encounter quality problems with your scanned image, try these solutions: Image is Distorted or Blurry • Do not move your original or your product during scanning. • Clean the scanner glass and the ADF and remove any dirt or dust on your originals. • Your product will not operate properly while tilted at an angle. Place your product on a flat, stable surface that extends beyond its base in all directions. • Adjust these Epson Scan 2 or Epson ScanSmart settings (if available) and try scanning again: • Increase the Resolution setting. • If the Image Type setting is Black & White, adjust the Threshold setting. • If the Image Type setting is Color or Grayscale, select the Unsharp Mask setting. • If the Image Type setting is Black & White, select Text Enhancement. If the Image Type setting is Color or Grayscale, change the Text Enhancement setting to High. Image is Too Dark • If the Image Type is set to Color or Grayscale, adjust the Brightness setting. • Check the brightness and contrast settings of your computer monitor. Back of Original Image Appears in Scanned Image • Place a piece of black paper on the back of the original and scan it again. • Lower the copy density setting. 231