Esoteric Grandioso D1 Owners Manual EN FR SP - Page 10

Names and functions of parts (main unit) ABC DE FG A POWER button Use to turn the unit on and off. When the unit is on, the ring around this button lights blue. When the unit is off, it is unlit. Turn the unit off when not using it. B CLOCK indicator This shows the clock synchronization status. Lit blue When the clock setting uses any synchronization other than PLL (CLK>OFF), the indicator blinks blue while the clock signal is being detected. The indicator stops blinking but stays lit when the signal is confirmed and synchronization starts. Lit green This lights when the unit is operating with the built-in oscillator during USB input. E Display This shows information about the selected input connector, for example. F INPUT selection button Use to change the digital input. Select a connector that has a digital source device connected. If no digital signal is being input, no sampling frequency will be shown to the right of the word "INPUT" on the display. G Parameter adjustment buttons (−/+) Use to change parameters when in setting mode. oo You cannot change the volume with this unit. C MENU button Use to enter setting mode (page 12). D Remote control signal receiver This receives signals from the remote control. When using a remote control, point it toward this receiver when operating it. oo This unit does not include a remote control. oo The dimmer of this unit can be adjusted using a remote con- trol included with a P1 or other Esoteric product (page 16). 10