Esoteric Grandioso D1 Owners Manual EN FR SP - Page 12

Basic operation 1 Press the POWER button to turn the unit on. Setting mode 1 Press the MENU button repeatedly to select the desired setting item. Press the POWER button in completely until it stops. When on, the POWER button lights blue. 2 Press the INPUT selection button to select the source. Each time you press the INPUT selection button, the active input changes in the following order and is shown on the display. ESLINK XLR RCA1 RCA2 USB OPT Select the input and start playback from the audio source device. If no digital signal is detected, no sampling frequency will be shown to the right of the word "INPUT" on the display. Confirm the connections before turning connected devices on. Each time you press the MENU button, the item shown on the display changes. UPCONV> x DSD_F> x CLK> x CLKin> x CLK_TH> APS> 2 DPaOFF> 2 AOUT> 2 DIMMER> 2 CH> If you press the INPUT selection button or do nothing for 10 or more seconds, setting mode will end and ordinary mode will resume. If the CH setting is set to Rch and L-R LINK connections have been made with a unit set to Lch, the only settings that can be changed in setting mode are CLK, CLKin and CH. The other settings will reflect changes made using the Lch D1. 2 Use the parameter adjustment (−/+) buttons to change the settings. oo When you are done using this unit, press the POWER button to turn it off. oo If the CH setting is set to Rch and an L-R LINK connection has been made with an Lch unit, the input cannot be changed from the Rch unit. Change the input using the D1 set to Lch. For information about settings, see pages 13-16. If you press the INPUT selection button once or do nothing for 10 or more seconds, setting mode will end and ordinary mode will resume. oo Settings are retained even if the power plug is disconnected. 12