Esoteric Grandioso D1 Owners Manual EN FR SP - Page 16
Dimmer setting, Analog output setting, Automatic display darkening setting
View all Esoteric Grandioso D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Setting mode (continued) Dimmer setting Automatic display darkening setting DIMMER>*** DPaOFF>*** You can adjust the brightness of this unit's display and indicators. By default, the setting is 3. 3 (normal brightness) 2 1 0 oo The dimmer of this unit can be adjusted using the DIMMER button of a remote control included with a P1 or other Esoteric product. oo Even when set to any value other than 3 (normal brightness), normal brightness will be used when displaying error messages and setting menus. Analog output setting AOUT>*** Use this to select the analog output connector to be used. By default, the setting is XLR2. RCA An analog audio signal is output from the RCA connector. XLR2 An analog audio signal is output from the XLR connector with pin 2 HOT. XLR3 An analog audio signal is output from the XLR connector with pin 3 HOT. You can set the display to darken automatically after a set amount of time has elapsed. By default, the setting is ON. ON The display will automatically darken after 30 minutes elapse without any operation or change in the information shown. OFF The display will not automatically darken. oo We recommend setting this to "ON" because brightness irregularities might occur if the same information is shown without change on the display for a long time. Automatic power saving setting APS>*** The unit will turn off automatically if the set amount of time passes without an input signal being locked. By default, the setting is 30m. oo The input sources that are not selected have no effect on automatic power saving. 30m 30 minutes 60m 60 minutes 90m 90 minutes 120m 120 minutes OFF The automatic power saving function is disabled. 16