Fisher and Paykel OR36SCG6R1 Installation Guide - Page 11
Fitting The Adjustable Feet
![]() |
View all Fisher and Paykel OR36SCG6R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
FITTING THE ADJUSTABLE FEET Fitting the adjustable feet The adjustable feet must be fitted to the base of the range before use. Rest the rear of the range on a piece of the polystyrene packaging exposing the base for the fitting of the feet. IMPORTANT Take care not to damage the range during this operation. Fit the four legs by screwing them tight into the support base as shown. Fitting the adjustable (front) feet covers (optional) If using the adjustable feet covers fit these while the range is tipped over. 1 Tip range onto its back and fix brackets to mounting holes. 2 Gently bend the sides of the inner panels outwards to tension. Levelling the range z The range may be levelled by screwing the lower ends of the feet IN or OUT. z Small adjustments may be made to the range in the upright position, however it may be necessary to tip the range again to make larger adjustments. 3 Slot the outer panels over the tensioned inner panels. 4 Secure covers to brackets using the provided screws 5 Stand range back upright. 6 Adjust the inner panels of the foot covers to suit height of range feet. 11
![](/manual_guide/products/fisher-paykel-or36sdg6x1-installation-guide-f40694b/11.png)