Fisher and Paykel OR36SCG6R1 Installation Guide - Page 12
Fitting The Adjustable Feet, Moving The Range
View all Fisher and Paykel OR36SCG6R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
FITTING THE ADJUSTABLE FEET Fitting the adjustable (rear) feet covers (optional) If installing rear feet covers use the following instructions to attach the mounting brackets to the base of the range. Washers A BC 1 Remove screws A, B and C from the plate on the base of the range. IMPORTANT! z When raising the range to upright position always ensure two people carry out this manoeuvre to prevent damage to the adjustable feet. z Be careful: do not lift the range by the oven door handle, the hob rail or the cooktop trim as this may damage the appliance. z When moving range to its final position DO NOT DRAG. Lift feet clear of floor. B 2 Replace screw C with one of the screws supplied with the feet covers. z This screw must be replaced before attaching the mounting bracket to the base of the range. 3 Attach the mounting bracket to the base of the range using the supplied screws. z Ensure the two supplied washers are fitted between the rear edge of the bracket and the base of the range (as shown). MOVING THE RANGE 4 Secure covers to brackets using the provided screws. 12