Fisher and Paykel OR36SCG6R1 Installation Guide - Page 14
Installing The Anti-tip Bracket
View all Fisher and Paykel OR36SCG6R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
INSTALLING THE ANTI-TIP BRACKET 3 Fix the stability bracket in place. It can be fixed as follows: z To the floor OR on the rear wall by #4 screws (supplied). z To the floor AND on the rear wall by #8 screws (supplied). z There are 8 x wood screws and 8 x screws with plastic sleeve anchors supplied with the range in two separate kits. Use the proper screws according to the type of material on the floor and/or wall. z If using the the plastic sleeve anchors: drill 5/16" (8mm) diameter holes and insert the supplied plastic sleeve anchors before attaching the stability bracket with the screws. 4 Slide the range into place, ensuring the bolt on the adjustable bracket slots under the stability bracket. z Adjust the length of the bolt as necessary. Ensure the two nuts are well tightened after any adjustments. IMPORTANT! z Use the proper screws to fix the stability bracket in place according to the type of material on the floor and/or wall. z Before drilling and holes or inserting any screws into the floor or wall check that you will not damage any wiring or pipes. Stability bracket = = 1(741556/m16m" ) Stability bracket Adjustable bracket with bolt correctly fitted Dotted line showing the position of the range when installed 14