Fisher and Paykel OR36SCG6R1 Installation Guide - Page 5
Parts Supplied For Installation, Tools Needed For Installation Not Supplied With The Appliance
![]() |
View all Fisher and Paykel OR36SCG6R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
PARTS SUPPLIED FOR INSTALLATION Anti-tip bracket (1) Small screws & washers (2) Bolt (1) Threaded nuts (2) Wood screws (8) Screws and plastic sleeve anchors (8) Pressure regulator (1) 1/2" (12.7mm) NPT connector and gasket (1) Gas extension pipe support bracket (1) and screws (2) Gas extension pipe and gasket (1) Ground lead* (3 wire permanent connection) Cupped washer* (4 wire permanent connection) *Can be used in US only, for Canada it is mandatory to connect the range by using cordset with plug supplied. TOOLS NEEDED FOR INSTALLATION (NOT SUPPLIED WITH THE APPLIANCE) IMPORTANT! This appliance must be installed by a qualified installer. z Improper installation, adjustment, alteration, services, or maintenance can cause injury or property damage. Consult a qualified installer, service agent, or the gas supplier. z The use of suitable protective clothing/gloves is recommended when handling or installing this appliance. Screwdriver 2 - Wrench T-handle wrench Pencil Tape measure Suitable protective gloves Hammer Adjustable wrench Adjustable pliers Drill 5
![](/manual_guide/products/fisher-paykel-or36sdg6x1-installation-guide-f40694b/5.png)