Fisher and Paykel OR36SCG6W1 User Guide - Page 61

TROUBLESHOOTING PROBLEM General I can feel hot air blowing out of the vents after I have turned the oven off. POSSIBLE CAUSES This is normal. The oven fan comes on when I select a function that does not use a fan (eg bake or classic bake). This is normal. The fan comes on while the oven is preheating. It may turn off when the oven has reached the set temperature. The oven has reached the set temperature but the temperature dial halo is still red (indicating that the oven is not ready to use). This is normal: when heating up from cold, your oven is designed to initially heat to a temperature somewhat higher than what you have set. This is to provide optimal baking conditions right from the start. The oven is heating but the display is dark. The oven is set to 'Display off' option. WHAT TO DO For safety reasons the cooling fans will continue to run even when you have turned the function dial to 'OFF'. The fans will switch off automatically when the oven has cooled. Wait until a long tone sounds and the temperature dial halo turns white: the oven will then be ready to use. Wait until a long tone sounds and the temperature dial halo turns white: the oven will then be ready to use. To quit the 'Display off' option, press and hold CANCEL until the display shows the time of day. The oven cancels automatic cooking when I try to adjust the clock setting. The temperature dial halo never turns white when I use Maxi Broil. The displays work, and the function and temperature dials halos come on but the oven does not heat up. The oven is in Sabbath setting. To quit Sabbath setting, press and hold CANCEL until the display shows the time of day. The oven was set for automatic cooking when you were trying to adjust the clock setting. You can only adjust the clock setting while the oven is not set for automatic cooking. This is normal: the halo stays red to indicate that the broil element provides instant radiant heat. The oven is in 'Demo' mode. Call Customer Care. 59