Fisher and Paykel OR36SCG6W1 User Guide - Page 62
Self Clean function
View all Fisher and Paykel OR36SCG6W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
TROUBLESHOOTING PROBLEM Self Clean function During a Self Clean cycle, the oven is louder than usual. POSSIBLE CAUSES WHAT TO DO This is normal: the oven's cooling fans operate at their highest speed. The Self Clean cycle has finished, but the oven door will not open. I have cancelled a Self Clean cycle but cannot use the oven: yy the oven door will not open yy the display is still counting down minutes or showing Self Clean Canceled yy the dials and controls are unresponsive. The oven is beeping and the display shows a2 or a3. There is a power cut during a Self Clean cycle. The oven door is locked because the oven is still too hot to be used for cooking. This is normal: if the function dial halo is unlit, you have successfully cancelled the Self Clean cycle. However, the oven is still too hot to be used for cooking and needs to cool down. Wait until the Self Clean cycle has finished. If you cancelled a Self Clean cycle which was already underway, the oven still needs to cool down before it can be used. The oven door will automatically unlock. Wait until the cool-down phase has finished. A long tone will sound and the oven door will automatically unlock when the oven is ready to use. Note: depending on when the Self Clean cycle was cancelled, the cool-down phase may take up to 45 minutes. See section 'Alert codes' for instructions. Power cut. The door will remain locked. Once the power is turned back on, the door will remain locked until the oven has cooled to a safe temperature. 60